Part Number Hot Search : 
L5988D SKFT40 D1225 SII5744 B80N0 74AC3 74LS27M HD74H
Product Description
Full Text Search
 

To Download ZMX40M Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  semiconductors description this device is a special tangential field difference sensor with two amr (anisotropic magneto-resistive) bridges for field movement measurements or field comparative measurements. the ZMX40M contains two extremely sensitive magnetic sensor chips, mounted parallel to each other in an sm8 package, employing the magneto-resistive effect of thin film permalloy. it allows the measurement of magnetic fields or the detection of magnetic parts. the sensors each consist of a chip covered with thin film permalloy stripes which form a wheatstone bridge, whose output voltage is proportional to the magnetic field component hy. a field hx, which is perpendicular to hy, is necessary to suppress the hysteresis and to bias the sensors into the linear region. this field hx is provided by an internal permanent magnet. the chips are mounted in the package 3mm apart. if a magnet travels horizontally above the sensor, each chip will give an output which will peak as the magnet passes above it and the two peaks will be spatially separated by 3mm. features ? output voltage proportional to magnetic field hy across each chip ? both chips are in the same orientation and chip centres are 3mm apart in y direction ? magnetic fields vertical to the chip level hz are not effective ? disturbing fields hx up to 30 ka/m are allowed ? extremely small chip distance from the top side of package for accurate measurement ? internal magnet each chip for creation of auxiliary field hx when the two peaks are the same amplitude, the magnet must be mid-way between the two chips. therefore this double sensor can be used to measure position of, for example, a wheel tooth very accurately for automotive and machine-tool applications. with calibration to allow for the tolerances on the bridge outputs being slightly different, the ZMX40M has been used in machine tool applications to resolve distances down to 30m. by comparing the two outputs and adding some hysteresis, a large-geometry magnetic tape reader (for example for a magnetic tape ruler) can be made. by combining both bridge outputs a current sensor can be also made by adding an external current loop over or under the ZMX40M. this loop is outside the package and therefore provides excellent galvanic isolation. applications ? linear position measurement for process control, door interlocks, proximity detectors and precision machine tools ? h-field movement measurement for a magnetic tape recognition ? high voltage isolated current measurement up to many amps range by using a suitable current loop over or under the ic ? detection of rotating magnets in the presence of a disturbing field by comparisons of maximum values of individual sensors device marking ? ZMX40M connection diagram amr chip 1: supply voltage between +vb1 and -vb1 output voltage of bridge between +v out 1 and -v out 1 amr chip 2: supply voltage between +vb2 and -vb2 output voltage of bridge between +v out 2 and -v out 2 ZMX40M issue 2 - june 2005 1 dual magnetic field sensor 1 top view pinout
ZMX40M semiconductors issue 2 - june 2005 2 parameter symbol min typ max unit test conditions bridge resistance r br 1.4 - 2.2 k  output voltage range v o /v b 12 - 24 mv/v open circuit sensitivity s 3.0 - 5.0 (mv/v)/ (ka/m) v b =const. hysteresis of output voltage v oh /v b - - 50 v/v offset voltage v off /v b -1.5 - +1.5 mv/v operating frequency f max 0 - 1 mhz temp. coeff. of offset voltage tcv off -3 - +3 (v/v)/k t amb = -25 to +125c temp. coeff. of bridge resistance tcr br +0.25 +0.3 +0.35 %/k t amb = -25 to +125c temp. coeff. of open circuit sensitivity v b =5v tcs v -0.25 -0.3 -0.35 %/k t amb = -25 to +125c temp. coeff. of open circuit sensitivity i b =3ma tcs i - -0.1 - %/k t amb = -25 to +125c parameter symbol limit unit supply voltage for each sensor chip (1,2) v b 12 v total power dissipation p tot 240 mw operating temperature range t amb -25 to +125 c storage temperature range t stg -25 to +125 c absolute maximum ratings electrical characteristics (at t amb =25c and h x =3 ka/m unless otherwise stated) device reel size tape width quantity per reel ZMX40Mt8ta 7? 12mm 1000 units ZMX40Mt8tc 13? 12mm 4000 units ordering information
ZMX40M semiconductors issue 2 - june 2005 typical applications magnetic tape scanning (field movement measurement for magnetic tape ruler): the changing voltage peaks in both amr bridges are used for the tape movement measurement. ZMX40M plus two instrumentation amplifiers for magnetic tape ruler current sensor (by combining both bridge outputs and a high isolation voltage) this double chip solution with the current loop conductor guarantees good rejection of external fields and a high isolation voltage. 3
ZMX40M semiconductors issue 2 - june 2005 4 accessories ? flexible magnet material *1 for length measuring systems with ZMX40M type of magnetic structure *2 (flexible magnets 9/28p *3 , remanence b r =220mt) parameter of length measuring system (sensor ZMX40M , chip distance s=3mm) pole length (n or s) [mm] distance of magnetic period (n/s) [mm] middle magnet distance [mm] neutral zone length [mm] thickness of material [mm] gap between tape (or strip) and sensor [mm] sine form error [%] sine area of field strength in sensor [ka/m] 90-condition of length measurement with arc tangent interpolation [tan()=] movement area for each tangent segment --- resolution [mm --- m] 2,00 2,00 2,00 2,00 2,00 4,00 4,00 4,00 4,00 4,00 2,00 2,00 2,00 2,00 2,00 0 0 0 0 0 0,50 0,75 1,00 # 1,25 1,50 # 1,70 1,90 2,00 2,10 2,20 0,07 0,05 0,03 0,02 0,02 2,6 2,7 2,7 2,4 2,3 sin()/-cos(+180) sin()/-cos(+180) sin()/-cos(+180) sin()/-cos(+180) sin()/-cos(+180) 1,000 --- 10 1,000 --- 10 1,000 --- 10 1,000 --- 10 1,000 --- 10 1,20 1,20 1,20 1,20 1,20 2,40 2,40 2,40 2,40 2,40 1,20 1,20 1,20 1,20 1,20 0 0 0 0 0 0,50 0,75 1,00 # 1,25 1,50 # 1,20 1,30 1,30 1,30 1,40 0,04 0,03 0,02 0,02 0,02 2,7 2,5 2,4 2,6 2,3 sin()/cos(+360) sin()/cos(+360) sin()/cos(+360) sin()/cos(+360) sin()/cos(+360) 0,600 --- 6 0,600 --- 6 0,600 --- 6 0,600 --- 6 0,600 --- 6 6,00 6,00 6,00 6,00 6,00 12,00 12,00 12,00 12,00 12,00 6,00 6,00 6,00 6,00 6,00 0 0 0 0 0 0,50 0,75 1,00 # 1,25 1,50 # 3,60 4,10 4,70 5,00 5,20 0,40 0,25 0,12 0,09 0,08 2,5 2,7 2,5 2,6 2,7 sin()/cos() sin()/cos() sin()/cos() sin()/cos() sin()/cos() 3,000 --- 30 3,000 --- 30 3,000 --- 30 3,000 --- 30 3,000 --- 30 type of magnetic structure *2 (flexible magnets 3/24p *4 , remanence b r =127mt) parameter of length measuring system (sensor ZMX40M , chip distance s=3mm) pole length (n or s) [mm] distance of magnetic period (n/s) [mm] middle magnet distance [mm] neutral zone length [mm] thickness of material [mm] gap between tape (or strip) and sensor [mm] sine form error [%] sine area of field strength in sensor [ka/m] 90-condition of length measurement with arc tangent interpolation [tan()=] movement area for each tangent segment --- resolution [mm --- m] 2,00 2,00 2,00 2,00 2,00 4,00 4,00 4,00 4,00 4,00 2,00 2,00 2,00 2,00 2,00 0 0 0 0 0 0,50 0,75 1,00 # 1,25 1,50 # 1,40 1,60 1,60 1,70 1,80 0,20 0,13 0,10 0,07 0,06 2,6 2,6 2,7 2,6 2,6 sin()/-cos(+180) sin()/-cos(+180) sin()/-cos(+180) sin()/-cos(+180) sin()/-cos(+180) 1,000 --- 10 1,000 --- 10 1,000 --- 10 1,000 --- 10 1,000 --- 10 1,20 1,20 1,20 1,20 1,20 2,40 2,40 2,40 2,40 2,40 1,20 1,20 1,20 1,20 1,20 0 0 0 0 0 0,50 0,75 1,00 # 1,25 1,50 # 1,00 1,10 1,10 1,20 1,20 0,12 0,06 0,05 0,04 0,03 2,7 2,4 2,3 2,3 2,3 sin()/cos(+360) sin()/cos(+360) sin()/cos(+360) sin()/cos(+360) sin()/cos(+360) 0,600 --- 6 0,600 --- 6 0,600 --- 6 0,600 --- 6 0,600 --- 6 6,00 6,00 6,00 6,00 6,00 12,00 12,00 12,00 12,00 12,00 6,00 6,00 6,00 6,00 6,00 0 0 0 0 0 0,50 0,75 1,00 # 1,25 1,50 # 2,40 3,20 3,50 3,90 4,20 1,40 0,65 0,45 0,33 0,23 2,7 2,5 2,7 2,7 2,6 sin()/cos() sin()/cos() sin()/cos() sin()/cos() sin()/cos() 3,000 --- 30 3,000 --- 30 3,000 --- 30 3,000 --- 30 3,000 --- 30 *1 possible source of the flexible magnet accessories, max baermann gmbh (51429 bergisch gladbach, germany) (www.max-baermann.de) .
ZMX40M semiconductors issue 2 - june 2005 5 *2 according to the application two different forms can be used. a.) magnetic strips for length measuring systems of short distances up to approximately 100mm [flexible plastic material filled with magnetic north-south-parts in a defined raster , for example thickness 1,5mm an d width 5mm and magnet pole length 2mm with transverse unilateral magnetiz ation , separably from magnetized foils of the company max baermann gmbh , contact address sales & applications, mr. nass : email h.nass@max-baermann.de and phone (+49) (02204) 8309-118 ] b.) magnetic tapes for steel-stabilized length measuring systems of large distances more than 100mm (only the thicknesses x # in above tables) [flexible plastic material wi thout multipolar magnetization by company max baermann gmbh , for example, tapes with thi c kness 1mm and width 5mm and tape length 30m , transverse unilateral multip olar magnetization must be implem ented by a suitable third-party ] *3 parameter of tromaflex 928 by company max baermann gmbh : flexible plastic bonded ferrite material 9/28p according to din 17410 , anisotropic strontium ferrite , b r = 220mt , b hc = 170 ka/m , i hc = 280 ka/m , bh max. = 9,0 kj/m 3 , density = 3,5 g/m 3 , middle strain coefficient = 4,4910 -5 m/k to 1m length , operating temperature range = -20c to +70c *4 parameter of tromaflex 324 by company max baermann gmbh : flexible plastic bonded ferrite material 3/24p according to din 17410 , isotropic barium ferrite , b r = 127mt , b hc = 91 ka/m , i hc = 240 ka/m , bh max. = 3,0 kj/m 3 , density = 3,4 g/m 3 , middle strain coefficient = 4,4910 -5 m/k to 1m length , operating temperature range = -20c to +70c principles ? length measurement with arc tangent interpolation for ZMX40M picture : magnetic field representation of magnetic tape (or strip) picture : mathematical principle sensor output 1 (chip 1) : v 1 = h max ? cos (w ? 2/) = h max ? sin ((w ? 2/)+/2) h max = func (r , "magnetic structure") sensor output 2 (chip 2) : v 2 = h max ? sin (w ? 2/) r = gap be tween tape (or strip) and sensor way of movement : w = (/2) ? arctan (v 2 /v 1 )
ZMX40M semiconductors issue 2 - june 2005 6 principles ? magnetic structures of tape or strip for ZMX40M variant 1a : : distance of magnetic period = 2?(b+a) = 12mm : pole width n = b = 2mm : pole width s = b = 2mm : middle magnet distance = b+a = 6mm : neutral zone width = a = 4mm : 90-condition s = (b+a) / 2 : processing tan () = sin () / cos () variant 1b : : distance of magnetic period = 2?(b+a) = 12mm : pole width n = b = 5mm : pole width s = b = 5mm : middle magnet distance = b+a = 6mm : neutral zone width = a = 1mm : 90-condition s = (b+a) / 2 : processing tan () = sin () / cos () variant 1c ...... etc. ...... etc. (with different relations b to a) variant 2 : : distance of magnetic period = 2?b = 12mm : pole width n = b = 6mm : pole width s = b = 6mm : middle magnet distance = b = 6mm : neutral zone width = a = 0 : 90-condition s = b / 2 : processing tan () = sin () / cos () variant 3 : : distance of magnetic period = 2?b = 4mm : pole width n = b = 2mm : pole width s = b = 2mm : middle magnet distance = b = 2mm : neutral zone width = a = 0 : (90+180)-condition s = (b / 2)+b : processing tan () = sin () / cos () = sin () / -cos (+180) the basis of a length measuring system with ZMX40M is a flexible plastic band (tape or strip) filled with magnetic north-south-parts. this magnetic band is moved along un der a "ZMX40M - sensor head" or in reverse the head is mobile and the band is rigid. the following variants of magnetic band are possible for use with the ZMX40M.
ZMX40M semiconductors issue 2 - june 2005 7
ZMX40M semiconductors 8 issue 2 - june 2005 europe zetex gmbh streitfeldstra?e 19 d-81673 mnchen germany telefon: (49) 89 45 49 49 0 fax: (49) 89 45 49 49 49 europe.sales@zetex.com americas zetex inc 700 veterans memorial hwy hauppauge, ny 11788 usa telephone: (1) 631 360 2222 fax: (1) 631 360 8222 usa.sales@zetex.com asia pacific zetex (asia) ltd 3701-04 metroplaza tower 1 hing fong road, kwai fong hong kong telephone: (852) 26100 611 fax: (852) 24250 494 asia.sales@zetex.com corporate headquarters zetex semiconductors plc zetex technology park chadderton, oldham, ol9 9ll united kingdom telephone (44) 161 622 4444 fax: (44) 161 622 4446 hq@zetex.com these offices are supported by agents and distributors in major countries world-wide. this publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. the company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. for the latest product information, log on to www.zetex.com ? zetex semiconductors plc 2005 package outline dim millimeters inches dim millimeters inches min max typ. min max typ. min max typ. min max typ. a - 1.7 - - 0.067 - e1 - - 4.59 - - 0.1807 a1 0.02 0.1 - 0.008 0.004 - e2 - - 1.53 - - 0.0602 b - - 0.7 - - 0.0275 he 6.7 7.3 - 0.264 0.287 - c 0.24 0.32 - 0.009 0.013 - lp 0.9 - - 0.035 - - d 6.3 6.7 - 0.248 0.264 -  - 15 - - 15 - package dimensions


▲Up To Search▲   

 
Price & Availability of ZMX40M

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X